Type Z10 - Purlin Clamp Type HC31 - Suspended Ceiling Clip Type HC30 - Purlin Clamp
Type Z10 - Purlin Clamp
Description
A purlin clamp that encompasses the full range of
purlin sections and improves ease of installation due to its 'wider-mouth'
Data
| Product Code |
Torque (Nm) |
T (mm) |
L (mm) |
H (mm) |
W (mm) |
X (mm) |
Y (mm) |
| Z10 |
8 |
3 |
85 |
16 |
25 |
18 |
12 |
| Purlin Type |
Load (kN) |
| Multi-beam 2 & 3 |
0.20 |
| Metsec |
0.10 - 0.20 |
| Zeta |
0.15 |
Type HC31 - Suspended Ceiling Clip
Description
HC31 is designed to clip onto the edge of Ward Multibeam 3 purlins, to enable the installation of suspended ceilings. A Safe Working Load of 0.2kN is subject to the strength of the supporting purlin, please refer to the manufacturers specifications if unsure.
Type HC30 - Purlin Clamp
Description
HC30 clamps around the bottom edge of Ward Multibeam 3 purlins without the need to drill, and is suitable for the suspension of building services if the purlin is horizontal. A Safe Working Load of 0.2kN and a Factor of Safety of 3:1
|
