TAPCON SCREWS

Countersunk Tapcon Hex Head Tapcon

Countersunk Tapcon

countersunk tapcon

Description

Product Advantages

Fast installation, Drill, Drive, Done
Available in M5 and M6 and in lengths from 32 - 125mm, to cover a wide number of applications
Every box includes a free 'close tolerance' masonry bit
Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications
No need to pre-spot holes, no inserts are required
Removable - adjustable
Can be installed close to edges
Slotted Hex and Phillips flat head styles give flexibility in applications
Excellent corrosion protection
Available in 410 Stainless Steel (price on application)
Fire resistant

Specification

Diameter: 5mm and 6mm

Thread form: Reversed Hi-Lo®

Point type: Nail

Finish: Blue Climaseal

Corrosion - Salt spray results (ASTM 8117)

Kesternich Results (DIN 5008, 2.0L) = 30 Cycles - 10% or less red rust Salt Spray Results (ASTM B117) = 750 Hours - 10% or less red rust

Substrates

Concrete
Masonry
Blockwork
Pre-cast hollow concrete beams
Wood

1.With Condrive Sleeve off and drill bit exposed, drill pilot hole deeper than recommended anchor embedment. Snap correct anchor socket / drive bit onto end of Condrive Sleeve. Slide Condrive Sleeve over drill bit.

2. Insert head of Tapcon anchor into Hex or Phillips socket.

3. Put point of anchor into pre-drilled hole and drive until anchor is fully seated.

4.Ensure that the drilling tool is not set to hammer action during installation.

Head Styles

Phillips Flat Head

5mm Diameter: P2 Phillips Flat Head

6mm Diameter: P3 Phillips Flat Head

Slotted Hex Washer Head

5mm Diameter: 6.5mm Slotted Hex Washered Head

6mm Diameter: 8mm Slotted Hex Washered Head

Mechanical and Electrical Applications

Fixing Electrical Accessories

Saddles
Conduit clips
Back Boxes
P Clips
Cable clips
Cable cleats

Services

Ductwork
Cable trays, channel
Suspended ceilings

Steel and Concrete Applications

Timber to Concrete

Formwork
Battens
Base plates
Plywood backer boards

Metalwork

Railings, hand rails
Gates, brackets and signs
Fire protection and exterior insulation systems to masonry

Data

Eurocode	Thread Diameter	Drive Style	Fixture Thickness	Anchor Length	Hole Diameter	Min Hole Depth	Min Embed	Box Qty*

921507	5mm	P2	0 - 7mm	32mm	4mm	35mm	25mm	100
921508	5mm	P2	5 - 20mm	45mm	4mm	35mm	25mm	100
921509	5mm	P2	17 - 32mm	57mm	4mm	35mm	25mm	100
921510	5mm	P2	30 - 45mm	70mm	4mm	35mm	25mm	100
921511	5mm	P2	42 - 57mm	82mm	4mm	35mm	25mm	100
921512	5mm	P2	60 - 75mm	100mm	4mm	35mm	25mm	100
921513	6mm	P3	0 - 7mm	32mm	5mm	35mm	25mm	100
921514	6mm	P3	5 - 20mm	45mm	5mm	35mm	25mm	100
921515	6mm	P3	17 - 32mm	57mm	5mm	35mm	25mm	100
921516	6mm	P3	30 - 45mm	70mm	5mm	35mm	25mm	100
921517	6mm	P3	42 - 57mm	82mm	5mm	35mm	25mm	100
921518	6mm	P3	60 - 75mm	100mm	5mm	35mm	25mm	100
921519	6mm	P3	85 - 100mm	125mm	5mm	35mm	25mm	100
* Supplied complete with one 'D' end rotary percussion masonry drill bit in every box.

Countersunk Tapcon Cut Boxes
Eurocode	Thread Diameter	Drive Style	Fixture Thickness	Anchor Length	Hole DIameter	Min Hole Depth	Min Embed	Box Qty*


921530	5mm	P2	17 - 32mm	57mm	4mm	35mm	25mm	20 x 25
921531	5mm	P2	30 - 45mm	70mm	4mm	35mm	25mm	20 x 25
921532	6mm	P3	42 - 57mm	82mm	5mm	35mm	25mm	20 x 25
921533	6mm	P3	60 - 75mm	100mm	5mm	35mm	25mm	15 x 25


* Supplied complete with one 'D' end rotary percussion masonry drill bit in every box.

Hex Head Tapcon